Specifications

• 31" wide x 25" deep x 70" high

• 406 LBS

• 195 cold cans and 15 precooled cans

• 185 total capacity candy and chips standard setup

Features

• Powder Paint Finish

• Bill Escrow so if you put a $5.00 bill in, then you can make more than one selection or until all money is spent.  But, if you go longer than 15 seconds between selections then it will return the remaining money due to the customer. 

• Internal Lighting for Products Display

• LED Display.

• Shatter resistant polycarbonate product window.

• Flexible Helix Coils.

• Pop and Snack Units simply bolt together for Fast and Easy onsite setup.

• Programmable from .05 - $99.95 - Accepts $1.00, $5.00, $10.00, $20.00, returns all change due in coins.

• All metal product trays tilt thirty(30) degrees for simplified servicing.

• T-Handle Locks provide maximum security.

• Replenishing Coin Capacity has $40.00 worth of change for the change returner and all change inserted by customers replenishes any tubes that aren't totally full.

• 24 Volt Changer, DEX Compatible

• Coinco Bill Validator W/DEX Compatible Stacker

• Fall Forward Product

• Sold Out Switch comes set on and is normally used this way, it will stop and hold 2 selections so the next time you service, it will already have 2 cold cans for each selection ready for you.  Then, if switched to off it will run each column dry, which is handy when changing products.

• Locking Latch on all Shelves.

Manufacturer's Warranty
1 Year warranty on all parts.

MANUFACTURER'S WARRANTY

WHAT IS COVERED: Manufacturer warrants TO THE ORIGINAL PURCHASER ONLY that each item of equipment manufactured is free from defects in material and workmanship under normal use and service. Manufacturer's obligation under this warranty shall be limited to repair or replacement, at our plant, of any parts of the equipment which shall, within one year of the date of shipment to the original purchaser, be demonstrated to be defective. The original purchaser may obtain repair or replacement of the equipment under this warranty by returning the defective item or entire vendor to the Manufacturer, freight prepaid.

WHAT IS NOT COVERED: Manufacturer's warranty obligations DO NOT EXTEND TO OR INCLUDE installation expenses, vandalism, or difficulties resulting from failure to operate equipment in accordance with Manufacturer's instructions under competent supervision and difficulties due to changes in vended products which are beyond the control of Manufacturer.

SPECIAL NOTE: Manufacturer is not responsible for any loss of income due to a vending machine being out of service due to a warrantable item. This warranty is in lieu of all other warranties, expressed or implied, including the warranty of merchantability and fitness or use, and of all other obligations or liabilities on Manufacturer's part. Manufacturer neither assumes, nor authorizes any other person to assume for it, any other liability in connection with the sale of equipment manufactured by itself. This warranty shall not apply to equipment manufactured or any part thereof which is subject to accident, negligence, alteration, abuse, misuse or damage in shipment. The term "original purchaser," as used in this warranty, shall be deemed to mean that person for whom the equipment is originally installed. Manufacturer is not liable for any incidental, consequential or other damages of any kind whatsoever, directly or indirectly, arising from the use of the equipment whether based upon theories of contract negligence or tort.

Effective 9/01